Calendar - The Rediscovery Centre
Please note that you by using this calendar your 'booking' will not be confirmed until The Rediscovery Centre contact you to confirm registered details and take payment for the course.
When you click 'Book' you will be taken to a registration form to register your details with The Rediscovery Centre for that course. The Rediscovery Centre will then get in touch with you to confirm your details and arrange payment. After payment has been made the course will then be booked.
SEARCH
| Date | Time | Course | Location | Availability |
|---|---|---|---|---|
| Thu, Sep 3, 2026
To Fri, Sep 4, 2026 |
9.00am - 5.00pm each day |
Cytech technical one practical - End of Week, Start back to Study
This course is aimed at technicians, and support staff, new to the bicycle industry. Covering everything needed to competently perform a Pre-Delivery Inspection (PDI) on a bicycle in compliance with the latest recognised standards, as well as basic maintenance, frame prep, and fundamental work etiquette. Pairs with Cytech Technical one Theory course to make up the Cytech Technical one certificate. For more information click here. |
The Rediscovery Centre |
Fully booked
|
| Fri, Sep 11, 2026
To Sat, Sep 12, 2026 |
9.00am start, up to 5.00pm finish |
Cytech home mechanic - End of Week, Prep for Winter!
This is a two full-day course with no assessment, covering all the basic needed to maintain your own bicycle(s) at home - tyres, brakes, gears, wheel straightening, general checks and adjustments, and anything else there is time for. All learner's are highly encouraged to bring their own bicycle to learn on their unique components, but practise bikes can be provided For more information click here. |
The Rediscovery Centre |
Available
|
| Mon, Sep 28, 2026
To Fri, Oct 2, 2026 |
9.00am - 5.00pm each day |
Cytech technical three - with electronic gear systems - Specialise in September!
A course for advanced technicians, experienced enough to work on the most sensitive and complex components found on modern bicycles: Servicing front and rear suspension units including springs and dampers, stripping and rebuilding dropper seatposts and disc brake calipers, diagnostics and fitting of electronic gear systems, and advanced wheel building. Cytech Technical Two qualification or similar experience is a must. For more information click here. |
The Rediscovery Centre |
Available
|
| Sat, Oct 10, 2026
To Sat, Oct 17, 2026 |
9.00am start, up to 5.00pm finish |
Cytech home mechanic - 2 Saturdays over 2 Weeks
This is a two full-day course with no assessment, covering all the basic needed to maintain your own bicycle(s) at home - tyres, brakes, gears, wheel straightening, general checks and adjustments, and anything else there is time for. All learner's are highly encouraged to bring their own bicycle to learn on their unique components, but practise bikes can be provided For more information click here. |
The Rediscovery Centre |
Available
|
| Mon, Oct 12, 2026
To Wed, Oct 14, 2026 |
9.00am - 5.00pm each day |
Cytech technical e-bike - Monday to Wednesday
A course dedicated to everything e-bike for technicians with good mechanical experience. From basic hub-based e-bikes, to mid-motor systems with diagnostic software, and foundational electronics principles to tie it all together - strip, rebuild, and test motors and e-bike systems to gain a comprehensive understanding. Cytech Technical Two qualification or similar experience is recommended as a prerequisite. For more information click here. |
The Rediscovery Centre |
Available
|
| Mon, Nov 9, 2026
To Fri, Nov 20, 2026 |
9.00am - 5.00pm each day |
Cytech technical two - 2 week comprehensive
2 weeks of intensive training and assessment, covering the skills and knowledge required to be a professional bike technician. It covers servicing and assembling all parts of a bicycle groupset from a variety of bikes, individually and as part of a full bicycle rebuild, and the skill of building and truing a wheel. Requires the Cytech Technical 1 qualification or adequate industry experience to attend For more information click here. |
The Rediscovery Centre |
Available
|
| Fri, Nov 27, 2026
To Fri, Dec 4, 2026 |
9.00am - 5.00pm each day |
Cytech technical one practical
This course is aimed at technicians, and support staff, new to the bicycle industry. Covering everything needed to competently perform a Pre-Delivery Inspection (PDI) on a bicycle in compliance with the latest recognised standards, as well as basic maintenance, frame prep, and fundamental work etiquette. Pairs with Cytech Technical one Theory course to make up the Cytech Technical one certificate. For more information click here. |
The Rediscovery Centre |
Available
|